Reflective marking tape -----“DOT C2” conspicuity vehicle marking tape is used quite often the regulation outlining the technical requirements to approved retroreflective marking tapes for trucks and trailers

However, what the meaning of “DOT C2” mark on conspicuity reflective tape for vehicle. Most people know that the letters DOT mean “Department of Transportation.  Also, some people know that the term C2, C3 or C4 refers to the width of the tape. (2″,3″ or 4”)  Most people do not know what it takes for a retroreflective tape for vhicle how to be certified as “DOT C2, C3, or C4”.  This DOT reflective tape is meant to help you understand what these requirements are so that you can be sure that you are using the correct product on your vehicle.  In the event of an accident, having the proper markings is especially important.  We recommend RT-V104 DOT tapes. We invented prismatic reflective tape and this products are respected and recognized around the world.  The downsides to using a cheap substitute are simply not worth it.

Color – DOT tape must be made reflective tape red an white alternating colors.  The white color on prismatic tapes often looks silver but reflects white at night. The exact wording of the regulation is as follows:

(a) Prismatic Retro-reflective sheeting shall be applied in a pattern of alternating white and red color segments to the sides and rear of each trailer, and to the rear of each truck tractor, and in white to the upper rear corners of each trailer and truck tractor